ShenZhen XDH Textile Co.,Ltd

established in 1995, which has over 20 years experiences in webbing filed!

Home > Exhibition > Content
How to do if elastic band is moldy?
- Aug 23, 2018 -

How to do if elastic band is moldy?


The material process controls the yarn woven by the webbing to add AEM5700-BJ textile anti-mold agent for anti-mildew treatment. Ensure that the yarn has excellent anti-mildew and antibacterial effects after being produced into a webbing. Some webbings can be directly sprayed with AEM5700-Spray anti-mold antibacterial agent on the upper and lower sides of the webbing without the need for a slurry process. This step needs to be done during the rainy season in April, May, and June. In the other season, just add AEM5700-BJ to the slurry.

Leather webbing: Some pieces of leather are usually used to modify the webbing. A small amount of leather anti-mold antibacterial agent can be added to the leather varnish to form a layer of anti-mold and anti-bacterial layer on the leather surface. Ensure that the leather will not be mildewed due to moisture.

Hardware-like webbing: When packaging the finished webbing, put a few packs of biochemical desiccant in a rectangular box to ensure the moisture content in the environment to 60%, to prevent the hardware from rusting due to moisture.


Warehouse control bamboo products and wood, rattan, mango, sunflower, grass, etc. and finished products should not be directly piled on the floor, should be separated by pallets, and > 10CM away from the wall. The material warehouse and the finished product warehouse should be sterilized once a month. In combination with the actual situation of your company, the floor should be kept clean and sanitary first. The fabric, packaging materials and finished product warehouses should be used once a month for the first three months, every three months after three months. Sterilize once, use 5% of AEM5700-Spray fungicide to add to the ground tow the water once (Note: the rainy season should be once a month).

 


The material warehouse and finished product warehouse are ventilated due to attention. When the outdoor humidity is greater than the indoor humidity, close the doors and windows, and vice versa, open the doors and windows to record the humidity and temperature changes. If the indoor humidity is ≥80% during the wet season. Dehumidification equipment or special warehouse sterilization kits should be installed to reduce the risk of moisture and mildew in the product. The container is combined to check whether the ventilation holes and sealing facilities are in good condition and whether they are leaky or deformed. Containers should be clean, free of oil, and odor-free to avoid cross-contamination. It is recommended to spray the sterilizing agent AEM5700-Spray (500g/piece per cabinet) in the container. After loading, in order to avoid the ("container rain") moisture caused by climate change in marine transportation, it is recommended to hang container anti-mildew rods on the inner wall of the container at intervals of 2-3M/piece.